Stonecontact.com offers a wide range of chainsaw stone cutting machines and other cutters in multiple sizes and designs. Quarry Chain Saw Machines are designed for use in medium hardness stone quarries such as marble, limestone, sandstone, tuff stone etc. But it can also be used in the extraction of hard rocks such as granite from the quarry with the suitable cutting segments for the hardness of the stone.
Quarry Chain Saw Machines can also cut on uneven ground, like cutting on 15 degree slope and also can cut stone blocks without water.
Quarry Chain Saw Machines can blindly cut, don't need to drill ahead of time or do any early work. They can save auxiliary time and large air compressor equipment. Cutting surface is very smooth, it can improve the condition of mines, and the blocks are square and don't need to be trimmed again.
Quarry Chain Saw Machines are quiet and safe in operation, have a good working environment and low labor intensity, only need one person to operate.
Quarry Chain Saw Machines have high cutting efficiency while continuously cutting, in the case of 3000mm cutting depth type, 10 hours continuously working can cut 60 square meters of cutting surface. Cutting cost is lower than that of diamond wire saw machines.
Dry cuts, no water supply required. The products are referred to Italy mainstream manufacturers’design, reasonable layout and structure, convenient operation. The gear boxes are planetary gear boxes, large bearing capacity, supplied by Italian producer. The rails and trolleys are made of alloy steel, big bearing capacity and deformation resistant. The hydraulic components are also from Italy. The main oil pumps and hydraulic motors are made in Germany. The electrical components are mainly from S
Our CSM series chain saw machines are suitable for dry cutting marble and soft stone. They can be used for multiple purposes and can cut the stone horizontally and vertically. Features: High rigidity, ensuring long-term stability and efficient operation; Friendly man-machine interface, easy to operate and maintain; PLC integrated control, realizing no dead angle cutting; The unique hydraulic control system can automatically adjust the cutting parameters according to the hardness of the stone to
The chain saw for rails machine is the most basic type, whose rails are placed on the surface of mining or body, and the rails are used alternately. Each machine can be designed to have two working modes of vertical and horizontal cutting, which is suitable for wide range of marble mines with high mining efficiency.
Chain saw for crawler is the enhanced one of orbital-type chain saw, the biggest characteristic of the machine is equipped with a pedrail walking itself, moving conveniently and flexibly.The machine host and pedrail move alternately in working, which don’t need to cooperate with other hoisting machinery moving track, suitable for outdoor use in mines. The machine can move on the uneven ground, allowing the machine to overcome inclined surfaces up to 25%(14°) The all machine is driven by a radio
Advantages of using chain saw for underground mines 1.Don’ t need to do the large - scale stripping skin and mountain earth , it can mine the finest marble resources directly . 2.Less land acquisition and trees cutting , less slag and gravel, low cost of slagging and vegetation restoration . 3.Fast exploitation , good appearance of blocks , high blocks yield. 4.High production efficiency, it is not affected by the weather , day and night time , and it can control the mining speed progress , and
SMT-CS3400 chain saw for wheel loader consists of chain arm cutting system and wheel loader , mainly used for cuting large blocks and cutting strip ore belt in mine , its features are : 1.This machine is powered by the diesel engine of the wheel loader , which can work independently without external power supply. 2.Mining operators work in the sealed cab in a friendly and safe working environment . 3.The machine can move fast and operate conveniently with high eficiency .
Advantages of using chain saw for underground mines 1.Don’ t need to do the large - scale stripping skin and mountain earth , it can mine the finest marble resources directly . 2.Less land acquisition and trees cutting , less slag and gravel, low cost of slagging and vegetation restoration . 3.Fast exploitation , good appearance of blocks , high blocks yield. 4.High production efficiency, it is not affected by the weather , day and night time , and it can control the mining speed progress , and
Advantages of using chain saw for underground mines 1.Don’ t need to do the large - scale stripping skin and mountain earth , it can mine the finest marble resources directly . 2.Less land acquisition and trees cutting , less slag and gravel, low cost of slagging and vegetation restoration . 3.Fast exploitation , good appearance of blocks , high blocks yield. 4.High production efficiency, it is not affected by the weather , day and night time , and it can control the mining speed progress , and
The chain saw for rails machine is the most basic type, whose rails are placed on the surface of mining or body, and the rails are used alternately. Each machine can be designed to have two working modes of vertical and horizontal cutting, which is suitable for wide range of marble mines with high mining efficiency.
The chain saw for rails machine is the most basic type, whose rails are placed on the surface of mining or body, and the rails are used alternately. Each machine can be designed to have two working modes of vertical and horizontal cutting, which is suitable for wide range of marble mines with high mining efficiency.
Chain saw for crawler is the enhanced one of orbital-type chain saw, the biggest characteristic of the machine is equipped with a pedrail walking itself, moving conveniently and flexibly.The machine host and pedrail move alternately in working, which don’t need to cooperate with other hoisting machinery moving track, suitable for outdoor use in mines. The machine can move on the uneven ground, allowing the machine to overcome inclined surfaces up to 25%(14°) The all machine is driven by a radio
SMT-CS3400 chain saw for wheel loader consists of chain arm cutting system and wheel loader , mainly used for cuting large blocks and cutting strip ore belt in mine , its features are : 1.This machine is powered by the diesel engine of the wheel loader , which can work independently without external power supply. 2.Mining operators work in the sealed cab in a friendly and safe working environment . 3.The machine can move fast and operate conveniently with high efficiency .
Chain saw machine "Victoria" (MKB-11) performs all types of sawing works: vertical, horizontal and at an angle. It works at temperature up to +40 without using cooling liquid.
Chain saws machines, Stationary machines for laboratory / sawmill Chain saw machine The chain saw model CST 965 is a cutting chain mounted on the rear of a wheeled tractor cab, called Terna. The machine is self powered and is autonomous both in handling and positioning. It can perform vertical cuts up to the maximum depth of 3.25 meters on marble, limestone and stone materials of similar hardness. The machine is ideal for squaring blocks and for the making series of front cuts. Arms and chains a
Type: Stone Quarry Machines › Stone Chain Saw Machines › Bank Chain Saw Machines
Warranty: 12 Months
Usage: Marble, Sandstone, Travertine
Machinery Function Features:
The 70RA/P chain saw machine is the most popular model in the FANTINI range as well as being the best selling machine of its type in the world. First manufactured in 1979, 70RA/P models can be found in all the most important natural stone extraction centres, and have come to represent the byword for quality and reliability. It features a cutting capacity of up to 5.1 m and is even suitable for use with marble and other very hard stones. The machine is operated by a hydraulic system with variable
The chain saw machine model ”NF-7.1” is designated for the extraction of marble and stone blocks in the open sky quarries using the most recent technologies. The chain saw “NF-7.1” permits to improve the performances and to reduce to minimum the cost of the cut. The chain saw “NF-7.1” is universal: it can execute vertical and horizontal cuts on materials with compression strength higher than 150 Mpa. The movement of the machine is made through a sprocket and rack element assembled on the rails.
Type: Stone Quarry Machines › Stone Chain Saw Machines › Squaring Chain Saw Machines
Usage: Granite, Marble
Machinery Function Features:
Crawler-type chain saw is the enhanced one of orbital-type chain saw,the biggest characteristic of the machine is equipped with a pedrail walking itself,moving conveniently and flexibly. The machine host and pedrail move alternately in working , which don't need to cooperate with other hoisting machinery moving track, suitable for outdoor use in mines. Each machine can be designed to have two kinds of working model--- vertical and horizontal cutting.
GD-CS2500, GD-CS3200, GD-CS4000,GD-CS6000, GD-CS7500 marble chain saw is the special marble quarrying equipment, which consists of a host, moving platform, rails, chain arm, chain, hydraulic system, electric control system, chain lubrication pump and other parts. Chain arm, cutting chain and the machine move on the rails, the machine can rapidly adjust oil cylinder action by the hydraulic pressure drive. The chain arm may rotate in 360 degree for vertical and horizontal cutting which can transla
GD-CS3200-XD marble chain saw is the special marble quarrying equipment, which consists of a host, moving platform, rails, chain arm, chain, hydraulic system, electric control system, chain lubrication pump and other parts. Chain arm, cutting chain and the machine move on the rails, the machine can rapidly adjust oil cylinder action by the hydraulic pressure drive. The chain arm may rotate in 360 degree for vertical and horizontal cutting which can translate freely according to the mining requir
GD-CS3200-YT marble chain saw is the special marble quarrying equipment, which consists of a host, moving platform, rails, chain arm, chain, hydraulic system, electric control system, chain lubrication pump and other parts. Chain arm, cutting chain and the machine move on the rails, the machine can rapidly adjust oil cylinder action by the hydraulic pressure drive. The chain arm may rotate in 360 degree for vertical and horizontal cutting which can translate freely according to the mining requir
GD-CS3200-LY marble chain saw is the special marble quarrying equipment, which consists of a host, moving platform, rails, chain arm, chain, hydraulic system, electric control system, chain lubrication pump and other parts. Chain arm, cutting chain and the machine move on the rails, the machine can rapidly adjust oil cylinder action by the hydraulic pressure drive. The chain arm may rotate in 360 degree for vertical and horizontal cutting which can translate freely according to the mining requir
LD-CS2500-P marble chain saw is the special marble quarrying equipment, which consists of a host, moving platform, rails, chain arm, chain, hydraulic system, electric control system, chain lubrication pump and other parts. Chain arm, cutting chain and the machine move on the rails, the machine can rapidly adjust oil cylinder action by the hydraulic pressure drive. The chain arm may rotate in 360 degree for vertical and horizontal cutting which can translate freely according to the mining require
Crawler-type chain saw is the enhanced one of orbital-type chain saw, the biggest characteristic of the machine is equipped with a pedrail walking itself, moving conveniently and flexibly. The machine host and pedrail move alternately in working , which don't need to cooperate with other hoisting machinery moving track, suitable for outdoor use in mines. Each machine can be designed to have two kinds of working model--- vertical and horizontal cutting.
Mobile Single Wire Saw with Crawler harmonizes the advantages of a stationary machine with a mobile quarry machine. It is composed of a single wire structure installed on a track chassis and is equipped with a diesel engine, which can be easily configured for transport from quarry to quarry on trailer. Equipped with 4 hydraulic stabilizers, the cutting arch is rotated and brought to the desired height, thus aligning the wire to the face of the block to be cut. The arch structure slides verticall
Marble chain saw is for marble quarrying. The chain arm may rotate in 360 degree for vertical andhorizontal cutting which can translate freely according to the mining requirement. The cuttingspeed can be adjusted according to the hardness ofstone when the moving speed of moving platform between 0-10.3m/h.
Dry cuts, no water supply required. The products are referred to Italy mainstream manufacturers’ design, reasonable layout and structure, convenient operation. The gear boxes are planetary gear boxes, large bearing capacity, supplied by Italian producer. The rails and trolleys are made of alloy steel, big bearing capacity and deformation resistant. The hydraulic components are also from Italy. The main oil pumps and hydraulic motors are made in Germany. The electrical components are mainly from
Marble chain saw is for marble quarrying. The chain arm may rotate in 360 degree for vertical andhorizontal cutting which can translate freely according to the mining requirement. The cuttingspeed can be adjusted according to the hardness ofstone when the moving speed of moving platform between 0-10.3m/h.
Chain saw machine "Victoria" (MKB-11) performs all types of sawing works: vertical, horizontal and at an angle. It works at temperature up to +40 without using cooling liquid.
SMT-CS3400 chain saw for wheel loader consists of chain arm cutting system and wheel loader , mainly used for cuting large blocks and cutting strip ore belt in mine , its features are : 1.This machine is powered by the diesel engine of the wheel loader , which can work independently without external power supply. 2.Mining operators work in the sealed cab in a friendly and safe working environment . 3.The machine can move fast and operate conveniently with high efficiency .
Model：FM- CS3200 Power： 53Kw Input Power and cable： 380V 50HZ， 3×35 mm²+1×10 mm² Capacity of the hydraulic tank： 200L Lubricating oil capacity： 25kg The maximum vertical cutting depth： 3.2m The maximum horizontal cutting depth： 3.2m Kerf width： 40 mm Chain rotation Angle： 360° Cutting chain speed： 0～1.2m/s Quick positioning speed： 30m/h Cutting speed： 0～7 m/h Water supply and Water pressure： 30L/min,3bar(Cutting normal Marble doesn't need water.）
Can a quarry chain saw machine cut granite?View answer⌄
Asked by Visitor
Quarry chain saw machines are designed for use in medium hardness stone quarries but with the suitable cutting segments they also can be used in granite quarries.
Italy
China
Turkey
Greece
United States
Russian Federation
