Marble Crystallizer

Product Description:

K2 is a safe and proven crystallization liquid used to maintain polished marble, terrazzo and granite. The use of this time tested product  has a history dating back  to  the  1960’s. K2 chemically transforms  the stones surface similar to conventional methodology done at the factory. The crystallization action can be equated as a chemical reaction that is initiated through the use of steel wool, special chemical compounds and the basic stone surface. The result is a harder, mirror like, vitrified surface. The KLEEVER system allows the floor to continue to “breathe” through  microscopic channels of the stone. K2 is “the” crystallizer by which all others are measured.

Special Features:

Easy to use.

Extends life of polished stones.

Greatly reduces the need for restoration.

Requires much less time as compared to traditional strip and wax methods.

Non scuffing.

Gives a mirror-like polish.

Non Slippery.

Where  and  When  to Use:

K2 can be applied wherever the nature & condition of the floor surface permits. This product is for use on polished stone surfaces only.

Packaging:

2 Lt

5 Lt

Directions  for use:

Dust mop or sweep the flooring daily prior to cleaning.

Crystallize the flooring as needed. Frequency may vary depending on foot traffic.

Using  the  CP400 or  CP500 machine begin by filling the  left chemical dispensing bottle with  K2 and  the  right  chemical  dispensing  bottle with K3. Using a clean steel wool pad #0,#1 #2 begin the polishing process by applying K2 across 1 square meter of marble flooring using the left chemical dispensing bottle  provided  with your CP400 or CP500. Dispense the chemical while running the machine to the left into the stream of K2 during the dispensing process.

You will be using the direction of the machine and the steel wool pad to spread the K2 across the 1 square meter area. This motion will increase the actual working area to approximately 2 square meters.