Type: Stone Factory Machines › Stone Tile Cutting Machines › Mitre Saw, Edge Cutting Machine
Warranty: 12 Months
Usage: Granite, Marble, Limestone, Slate, Onyx, Artificial Stone, Basalt, Quartzite, Sandstone, Travertine
Machinery Function Features:
QXZ-ZD-1800 AUTOMATIC SERIES FOR CUTTING CERAMIC TILE PANELS
Type: Stone Factory Machines › Stone Tile Cutting Machines › Strip Cutting,Edge Trimming Machine
Warranty: 12 Months
Usage: Granite, Marble, Limestone, Sandstone, Travertine
Type: Stone Factory Machines › Stone Tile Cutting Machines › Multi-Blade Cross-Cutter,Trimming
Warranty: 12 Months
Usage: Marble, Limestone, Onyx, Basalt, Quartzite, Sandstone, Travertine
Machinery Function Features:
Special machine for dividing reinforced panels with a max. Width into two parts. of 1,300 mm. and a thickness of 20/100 mm. Electro-welded steel structure with cast iron columns and beams on which 2 spindles are applied in parallel position carrying 2 discs Ø 725 mm. plus supporting structure diamond wire Ø 7.2 mm. with n ° 2 flywheels Ø 1.000 mm. driven by a motor managed by an inverter to obtain an optimal peripheral speed of the diamond wire, confirming the type of material that will be cut;
Type: Stone Hand Held Machines › Stone Hand Drill Machines
Warranty: 12 Months
Usage: Granite, Marble, Limestone, Slate, Onyx, Artificial Stone, Basalt, Quartzite, Sandstone, Travertine
Machinery Function Features:
Anchor Hole Drilling Machine for Stone and Ceramic Panels Application: Anchor Hole Drilling Machine is used with diamond drill bits, air compressor and water pump,to drill holes for undercut anchors in ceramic or stone panels, such as granite, marble,travertine, limestone, sand stone, concrete panels, cement fiber board..., etc. For exterior and interior wall cladding projects. Specification: 350mm(Length)x380mm(Width)x500mm(Height). Accessory: Air Compressor, Water Pump, Diamond Drill Bit, tool
Type: Stone Factory Machines › Stone Handling, Loading Machines › Automatic Loader, Unloader for Slabs
Warranty: 12 Months
Usage: Granite, Marble, Limestone, Artificial Stone, Basalt, Quartzite
Machinery Function Features:
Eight points vacuum for sandwich panels with depressor and radio control Ref. 50790-8 technical characteristics: Load capacity: 300kg Tare: 200kg Extensible structure with two telescopic arms: Length collected: 4m Stretched length: 7m Tipping equipment in all directions without loss of oil or acids Balance with ropes to be able to make the turn up to 90º Suction cups with anti-oil rubber and mounted on a suction cup with springs Compressed air supply Pump group with: Rotary pump Double tank Doub
Type: Stone Factory Machines › Stone Handling, Loading Machines › Automatic Loader, Unloader for Slabs
Warranty: 12 Months
Usage: Granite, Marble, Artificial Stone, Basalt
Machinery Function Features:
Automatic 12 points vacuum with self-supporting structure Ref. 50760-12 Technical characteristics: Compressed air supply 6 bar Electrovalve to catch and release the material Vacuum indicator Probe for presence of the material Load capacity 300Kgs.
Type: Stone Factory Machines › Stone Tile Cutting Machines › Mitre Saw, Edge Cutting Machine
Warranty: 12 Months
Usage: Granite, Marble, Limestone, Slate, Onyx, Artificial Stone, Basalt, Quartzite, Sandstone, Travertine
Machinery Function Features:
QXZ-ZD-1800 AUTOMATIC SERIES FOR CUTTING CERAMIC TILE PANELS
Type: Stone Hand Held Machines › Stone Hand Drill Machines
Warranty: 12 Months
Usage: Granite, Marble, Limestone, Slate, Onyx, Artificial Stone, Basalt, Quartzite, Sandstone, Travertine
Machinery Function Features:
Anchor Hole Drilling Machine for Stone and Ceramic Panels Application: Anchor Hole Drilling Machine is used with diamond drill bits, air compressor and water pump,to drill holes for undercut anchors in ceramic or stone panels, such as granite, marble,travertine, limestone, sand stone, concrete panels, cement fiber board..., etc. For exterior and interior wall cladding projects. Specification: 350mm(Length)x380mm(Width)x500mm(Height). Accessory: Air Compressor, Water Pump, Diamond Drill Bit, tool
Type: Stone Factory Machines › Stone Tile Cutting Machines › Multi-Blade Cross-Cutter,Trimming
Warranty: 12 Months
Usage: Marble, Limestone, Onyx, Basalt, Quartzite, Sandstone, Travertine
Machinery Function Features:
Special machine for dividing reinforced panels with a max. Width into two parts. of 1,300 mm. and a thickness of 20/100 mm. Electro-welded steel structure with cast iron columns and beams on which 2 spindles are applied in parallel position carrying 2 discs Ø 725 mm. plus supporting structure diamond wire Ø 7.2 mm. with n ° 2 flywheels Ø 1.000 mm. driven by a motor managed by an inverter to obtain an optimal peripheral speed of the diamond wire, confirming the type of material that will be cut;
Type: Stone Factory Machines › Stone Handling, Loading Machines › Automatic Loader, Unloader for Slabs
Warranty: 12 Months
Usage: Granite, Marble, Artificial Stone, Basalt
Machinery Function Features:
Automatic 12 points vacuum with self-supporting structure Ref. 50760-12 Technical characteristics: Compressed air supply 6 bar Electrovalve to catch and release the material Vacuum indicator Probe for presence of the material Load capacity 300Kgs.
China
Spain
Italy
Pakistan
